Name: AA428-210 (AO2) Honeywell Oxygen Sensor
SKU: 58588
Price: 3000.00 INR
Availability: InStock

AA428-210 (AO2) Honeywell Oxygen Sensor

₹3,000.00 Excluding GST

Available in Stock

For Bulk requirement, Kindly click on enquiry now button

Product Details :

Product	Description
Brand	Honeywell
Model Name/Number	AA428-210
Type	Oxygen Sensor
Operating Principle	Partial Pressure Electrochemical
Output	9 – 13 mV in Air
Measurement range	0 % … 100 % oxygen (at atmospheric pressure)
Pressure range	0.5 – 2.0 Bar
Operating temperature	-20°C to +50°C
Response time	<40 s
Housing Material	Red ABS
Weight	40 grams

Above specifications mentioned are for quick reference only. Actual technical details has to be obtained from below catalog.

Description

AA428-210 (AO2) Honeywell Sensor

Key Features & Benefits

• Molex Connector
• Linear Output from 0-100% Oxygen

Poisoning

Honeywell AA428-210 (AO2) Oxygen Sensor designed for operation in a wide range of environments and harsh conditions. However, avoiding exposure to high concentrations of solvent vapours is important during storage, fitting into instruments, and operation.

When using sensors with printed circuit boards (PCBs), it is necessary to use degreasing agents before fitting the sensor. Do not glue directly on or near the CiTiceL as the solvent may cause crazing of the plastic.

Mechanical Installation

To avoid damaging the sensor thread, it is essential to only screw in the sensor by hand-tight and ensure a gas tight seal during installation. To prevent damage to the sensor thread, the use of spanners and similar mechanical aids is not permitted since they may apply excessive force.

Cross Sensitivity Table

CiTiceLs, despite being designed to be highly specific to the gas they are intended to measure, will still respond to some degree to various other gases that are not intended to be measured. Moreover, the table below is not exclusive and other gases not included in the table may still cause a sensor to react.

IMPORTANT NOTE : The cross sensitivity data shown below does not form part of the product specification and is supplied for guidance only. Values quoted are based on tests conducted on a small number of sensors and any batch may show significant variation. To achieve the most accurate measurements, calibrate the instrument using the gas under investigation.

The AO2 has tested a number of gases that may be present in automotive exhaust to establish their level of cross interference.