ABP2MDAN004KD2A3XX Honeywell Board Mount Pressure Sensor

Available on order

For Bulk requirement, Kindly click on enquiry now button

Product Details:

Product	Description
Brand	Honeywell
Model	ABP2MDAN004KD2A3XX
Product Series	ABP2 Amplified Basic
Package	SMT (Surface Mount Technology)
Pressure Port	Dual axial barbed ports, same side
Product Option	Liquid media, food-grade silicone gel, no diagnostics
Pressure Range	±4 kPa
Output Type	2 C, Address 0x28
Transfer Function	10% to 90% of Vsupply (analog), 224 counts (digital)
Supply Voltage	3.3 Vdc
Operating temperature range	-40 to 110 °C
Accuracy	±0.25 %FSS BFSL
Vibration	15 g, 10 Hz to 2 kHz
Life	1 million full scale pressure cycles minimum
Shock	75 g, 6 ms duration

Above specifications mentioned are for quick reference only. Actual technical details has to be obtained from below catalog.

Description

ABP2MDAN004KD2A3XX Honeywell Pressure Sensor ABP2 Series are piezoresistive silicon pressure sensors offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. Honeywell ABPDANN150PGAA5 Pressure Sensor are calibrated and temperature compensated for sensor offset, sensitivity, temperature effects and accuracy errors (which include non-linearity, repeatability and hysteresis) using an on-board Application Specific Integrated Circuit (ASIC). Honeywell ABP2DANT015PAAA5XX Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital. All products are designed and manufactured according to ISO 9001 standards.

• Dry gases option: The input port is limited to non-corrosive, non-ionic media (e.g., dry air, gases) and should not be exposed to condensation. The gases are limited to media compatible with high temperature polyamide, silicone, alumina ceramic, silicon, gold, and glass.

• Liquid media option: Includes an additional silicone-based gel coating to protect the electronics under port P1, which enables use with non-corrosive liquids (e.g. water and saline) and in applications where condensation can occur. Since port P2 is designed for use with non corrosive liquids, this option is often suitable for wet-wet differential sensing.

FEATURES

Total Error Band (see Figure 1): As low as ±1.5 %FSS
Liquid media option: Compatible with a variety of liquid media
Long-term stability: as low as ±0.2 %FSS
Accuracy: ±0.25 %FSS BFSL
Wide pressure range: 6 mbar to 12 bar | 600 Pa to 1.2 MPa | 2 inH2O to 175 psi
High burst pressures
Wide operating temperature range of -40°C to 110°C [-40°F to 230°F]
Calibrated over wide temperature range of -40°C to 110°C [-40°F to 230°F]
24-bit digital I2C or SPI-compatible output
Ratiometric analog output
IoT (Internet of Things) ready interface
Ultra-low power consumption (as low as 0.01 mW typ. average power, 1 Hz measurement frequency)
Meets IPC/JEDEC J-STD-020E Moisture Sensitivity Level 1
REACH and RoHS compliant
Temperature output available
NSF-169, LFGB and BPA compliant materials