SNDH-T4P-G01 Honeywell Speed and Direction Sensor

For Bulk requirement, Kindly click on enquiry now button

Product Details:

Product	Description
Brand	Honeywell
Model No.	SNDH-T4P-G01
Supply voltage	4.5 V to 18 V
Output signal type	square wave
Output signal duty cycle	50% ±10%
phase shift	90° ±20°
load current	20 mA max.
Rise time	10 µs typ
Fall time	1µs max.
Frequency	1 Hz to 15 kHz
Short circuit protection	80 mA max.
Target tooth width	2,0 mm [0.08 in] (recommended)
Sensing air gap	0 mm to 2,0 mm [0 in to 0.08 in]
Tooth height	>3,0 mm [0.12] (recommended)
Target width	>5,0 mm [0.20] (recommended)
Mechanical shock	50 g
Operating temperature	-40°C to 150°C
Thermal shock	-40°C to 150°C [-40°F to 302°F],
Humidity	95% humidity at 90 °C
Salt fog	96 hr
Thermal saline dunk	5 dunks 105 °C to 0 °C [221 °F to 32 °F] air to liquid, 5% saline
High temperature exposure with power	1000 hr at 150 °C [302 °F]
Vibration	30 g, 10 Hz to 2 kHz
Degree of protection	IP69K
Resistance to fluids	general under-the-hood automotive fluids
Connection Type	Cable with leads, straight exit
Housing Length	45 mm [1.77 in]

Above specifications mentioned are for quick reference only. Actual technical details has to be obtained from below catalog.

Description

SNDH-T4P-G01 Honeywell is a dual differential hall sensor that provides speed and direction information using a quadrature output with signals 90 phase shifted from each other. Target direction is determined by output lead/lag phase shifting. This product is designed for applications where extremely high resolution is required at wide frequency ranges, 1 kHz to 15 kHz, and large air gaps. BiCMOS (bipolar complementary metal-oxide-semiconductor) Hall-effect technology, using advanced digital signal processing for dynamic off-set cancellation, provides enhanced air gap performance and phase shift accuracy over most conditions.

Unique patented (pending) IC (integrated circuit) packaging provides output phase shift tolerancing with enhanced accuracy. The robust package is automotive under-the-hood grade for most environmental conditions as well as EMI (electromagentic interference) hardened. Multiple connection options, including wire harness and integral connector versions using AMP super seal or AMP Jr. Timer connectors, are available. Package design includes an o-ring seal for pressure applications and a fixed mounting flange.