Description
Model G Honeywell Pressure Transducers
DESCRIPTION
Honeywell’s full line of subminiature pressure transducers
accurately measure pressure ranges from 150 psi to 20000 psi.
These gage-only subminiature pressure transducers have a high
natural frequency and utilize a flush diaphragm.
Temperature compensation is accomplished by using
temperature-sensitive components located inside the
transducers. These transducers have a small electrical zero
balance circuit board which is in the lead wire (approximately 1
in x 0.087 in thick). This balance board does not have to be in
the same temperature as the transducers. All transducers have
four (4) active bonded strain gages arranged in a Wheatstonebridge configuration.
Most are manfuactured with a unitized stainless steel diaphragm.
The advantage of this type of design is that a thin diaphragm
and heavy sidewalls are made from one piece of stainless steel.
This unitized diaphragm is rugged, but at the same time it is thin
enough to measure low pressures.
Reviews
There are no reviews yet.