MOX20 (AAE29-210) City Technology Medical Sensor

Available on order

For Bulk requirement, Kindly click on enquiry now button

Product Details:

Product	Description
Brand	City Technology
Model Number	MOX20 (AAE29-210)
Operating Principle	Partial Pressure Electrochemical
Measurement Range	0-1500 mBar O2
Ouput*	0.80 – 1.25 V in 210 mBar O2
Response Time (T10-90)*	< 750 ms at 0.5 L/min
(N2 to 21% O2)	(T90 flow dependant)
Resolution	1 mBar O2
Linearity	Linear 0-100% O2 (see note 1)
Long Term Ouput Drift (100% O2)	Typically < 10% signal loss/year
Recommended Storage Temp	0 to +20°C
Expected Operating Life	276,000% O2 hours

Above specifications mentioned are for quick reference only. Actual technical details has to be obtained from below catalog.

Description

MOX20 (AAE29-210) City Technology Medical Sensor

MediceL® Oxygen (O2) Gas Sensors MOX20 Series
Honeywell MediceL® (MOX) Sensors include oxygen and a range of other gases that are designed specifically for use in respiratory and anesthesia applications.

Part number : AAE29-210

Instructions

The sensor should be replaced only by a professional user. Before insertion into the device, check the sensor for mechanical damages and for crystallization of salts on the housing – do not use a damaged sensor or a sensor with crystallization of salts outside. Follow the instructions for use of the oxygen analyzer for replacement of the sensor. Verify that the sensor can be properly attached to the mechanical and electrical connections of the oxygen analyzer. Calibrate the analyzer according to the instructions in the analyzer’s operation manual and verify proper gas readings. Oxygen analyzer readings in room air will typically be between 19 % and 23 % when calibrated in 100 % oxygen or another calibration gas level required in accordance with the analyzer’s instructions. The sensor should be calibrated in regular intervals (see instructions for use of the analyzer). If calibration problems or unstable signals occur, the sensor must be replaced.

Indications for use
The MOX series and INQOX Medical Oxygen Sensors are intended as oxygen-sensing components of an oxygen analyzer that measures oxygen concentration in breathing gas mixtures in the following applications:

Sensing device for oxygen in control device of oxygen concentrators
Sensing device for oxygen in medical ventilators
Sensing device for oxygen in anesthesia equipment (not tobe used with Xenon) – MOX sensors only
Sensing device for oxygen in incubators
Sensing device for continuous Positive airway Pressure (CPAP) – INQOX only

*** The use of these sensors is limited to system monitoring and by professional users. The sensors are not suited for breath by breath analysis.***