NX1(AF747-B05) City Technology Nitric Oxide Sensor

Available on order

For Bulk requirement, Kindly click on enquiry now button

Product Details:

Product	Description
Brand	City Technology
Model Number	NX1(AF747-B05)
Operating Principle	3-electrode electrochemical
Measurement Range	0-5,000 ppm NO
Filter	To remove effect of SO2 in gas stream
Sensitivity	0.05 ± 0.01 µA/ppm
Response Time (T95)	<8 Seconds at 20°C
Baseline Offset (clean air)	0 to +12 ppm equivalent
Zero Shift (0°C to +40°C)	<30 ppm equivalent
Resolution	Dependent on electronics (1 ppm when used with recommended electronics)
Repeatability	2% of signal
Linearity	Linear
Recommended Load Resistor	10 Ω
Bias Voltage	+300 mV
Weight	32 g (nominal)
Housing Material	ABS
Operating Temperature Range	-20°C to +50°C
Recommended Storage Temp	0°C to 25°C in CTL packaging
Operating Pressure Range	800 to 1100 mBar
Pressure Coefficient	0.02% signal/mBar
Operating Humidity Range	15 to 90% RH non-condensing
Long Term Sensitivity Drif	Typically <5% signal loss/year
Storage Life	6 months in CTL container

Above specifications mentioned are for quick reference only. Actual technical details has to be obtained from below catalog.

Description

NX1(AF747-B05) City Technology Nitric Oxide Sensor

Poisoning
CiTiceLs are designed for operation in a wide range of environments and harsh conditions. However, it is important
that exposure to high concentrations of solvent vapours is avoided, both during storage, fitting into instruments
and operation.
When using sensors with printed circuit boards (PCBs), degreasing agents should be used before the sensor is
fitted. Do not glue directly on or near the CiTiceL as the solvent may cause crazing of the plastic