AWM5101VN Honeywell Airflow Sensor

7,250.00 Excluding GST

Available in Stock

Kindly add the quantity in below box and click "Add to Cart" button to proceed

For Bulk requirement, Kindly click on enquiry now button

 

Product Details:

Product Description
Brand Honeywell
Model no. AWM5101VN
Flow Range (Note 3) 0-5 SLPM
Suffix – Calibration gas VN – Nitrogen (N2)
Excitation VDC 8 to 15
Power consumption (mW) 100
Response time (msec) 60
Common Mode
Pressure (psi)
50
Temperature range −20° to +70°C, (−4° to 158°F)
Weight 60 grams (2.12 oz.)
Shock ratings 100 g peak, 6 msec half-sine (3 drops, each direction of 3 axes)
Output @ laser trim point 5 VDC @ Full Scale Flow
Output voltage shift
+20° to −25°C, +20° to 70°C
Suffix VA or VN ±7.0% Reading
Linearity error (2) ±3.0% Reading (max.)
Repeatability & Hysteresis ±0.5% Reading (max.)
Connector (Included)
—Four pin receptacle
MICRO SWITCH (SS12143)/AMP (103956-3)
Leak rate, max 0.1 psi/min. at static condition, (Note 2)

Above specifications mentioned are for quick reference only. Actual technical details has to be obtained from below catalog.

brochure

Description

AWM5101VN Honeywell  Airflow Sensor

In-Line Flow Measurement
AWM5000 Series Microbridge Mass Airflow Sensors feature a venturi type flow housing. They measure flow as high as 20 standard liters per minute (SLPM) while inducing a maximum pressure drop of 2.25N H2O. The microbridge chip is in direct contact with the flow stream, greatly
reducing error possibilities due to orifice or bypass channel clogging.

Rugged, Versatile Package
The rugged plastic package has been designed to withstand common mode pressures up to 50 psi, and the small sensing element allows

100 gs of shock without compromising performance. The included ‘‘AMP’’ compatible connector provides reliable connection in demanding applications.

On-board Signal Conditioning
Each AWM5000 sensor contains circuitry which performs amplification, linearization, temperature compensation, and gas calibration. Figure 1 (Heater Control Circuit) and Figure 2 (Sensor Bridge Circuit and Amplification Linearization Circuit) illustrate the on-board electrical circuitry
for the AWM5000 Series. A 1 to 5 VDC linear output is possible for all listings regardless of flow range (5, 10, 15, or 20 SLPM) or calibration gas (nitrogen, carbon dioxide, nitrous oxide, or argon). All calibration is performed by active laser trimming.

FEATURES
Linear voltage output
Venturi design
Remote mounting capability
Active laser trimming improves interchange ability
Separate gas calibration types:
– Ar (argon)
– N2 (nitrogen) or
– CO2 (carbon dioxide)

Reviews

There are no reviews yet.

Be the first to review “AWM5101VN Honeywell Airflow Sensor”

Your email address will not be published. Required fields are marked *

Post comment